Commit Graph

16 Commits

Author SHA1 Message Date
roof d5018c2b34 fix: architecture audit — security, atomicity, broken endpoints, test coverage
Sprint 1 — Security & correctness:
- Restore all 10 commented-out is_local_request() checks (vault, containers, images, volumes)
- Fix XFF spoofing: only trust the LAST X-Forwarded-For entry (Caddy's append), not all
- Require prefix length in wireguard.address (was accepting bare IPs like 10.0.0.1)
- Validate service_access list in add_peer (valid: calendar/files/mail/webdav)
- Fix dhcp/reservations POST/DELETE: unpack mac/ip/hostname from body (was passing dict as positional arg)
- Fix network/test POST: remove spurious data arg (test_connectivity takes no args)
- Fix remove_peer: clear iptables rules and regenerate DNS ACLs on deletion (was leaving stale rules)
- Fix CoreDNS reload: SIGHUP → SIGUSR1 (SIGHUP kills the process; SIGUSR1 triggers reload plugin)
- Remove local.{domain} block from Corefile template (local.zone doesn't exist, caused log spam)
- Fix routing_manager._remove_nat_rule: targeted -D instead of flushing entire POSTROUTING chain

Sprint 2 — State consistency:
- Atomic config writes in config_manager, ip_utils, firewall_manager, network_manager
  (write to .tmp → fsync → os.replace, prevents truncated files on kill)
- backup_config: now also backs up Caddyfile, Corefile, .env, DNS zone files
- restore_config: restores all of the above so config stays consistent after restore

Sprint 3 — Dead code / documentation:
- Remove CellManager instantiation from app startup (was never called, double-instantiated all managers)
- Document routing_manager scope (targets host, not cell-wireguard; methods not called by any active route)

Sprint 4 — Test infrastructure:
- Add tests/conftest.py with shared tmp_dir, tmp_config_dir, tmp_data_dir, flask_client fixtures
- Add tests/test_config_validation.py: 400 paths for ip_range, port, wireguard.address validation
- Add tests/test_ip_utils_caddyfile.py: 14 tests for write_caddyfile (was completely untested)
- Expand test_app_misc.py: 7 new is_local_request tests covering XFF spoofing and cell-network IPs
- Add --cov-fail-under=70 to make test-coverage
- Add pre-commit hook that runs pytest before every commit

414 tests pass (was 372).

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-04-24 03:27:52 -04:00
roof 6cc40f5755 fix: make uninstall keeps images and data when user answers no
Previously 'n' still ran --rmi all, removing Docker images. Now:
- n (default): docker-compose down only — containers gone, images and
  data/config untouched; 'make start' brings everything back immediately
- y: full wipe — containers, images, config/ and data/ all removed

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-04-22 15:43:14 -04:00
roof 5f4f635719 fix: make update runs setup automatically if config is missing
After make uninstall (which wipes config/ and data/), running make update
directly failed with "Couldn't find env file: config/mail/mailserver.env"
because docker-compose needs the generated config files to exist.

make update now checks for the sentinel config file and calls make setup
first if it's missing, so uninstall → update works as a valid flow.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-04-22 14:34:42 -04:00
roof 16af657376 feat: make uninstall prompts before wiping data
Shows a warning then asks: y = full wipe, n/Enter = stop+remove images
only (keep config/data), anything else = cancel. Updates help + README.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-04-22 09:44:08 -04:00
roof 78310a70ba feat: add update, reinstall, uninstall, logs-<svc>, shell-<svc> targets
- update: git pull + rebuild + restart
- reinstall: full wipe (config/data) + setup + start
- uninstall: stop, remove images, wipe config/data
- logs-<svc>: follow logs for any single service
- shell-<svc>: exec into any container (bash with sh fallback)
- backup: use sudo tar to read container-owned files
- help: restructured with all commands documented
- README: updated Quick Start + added Management Commands reference

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-04-22 09:38:30 -04:00
roof 30878fe539 fix: check-deps installs all required system packages via apt
scripts/check_deps.sh now checks and installs all prerequisites:
git, curl, openssl, python3, python3-cryptography, docker, docker-compose.
Runs apt-get update only once if anything needs installing.
Also adds current user to docker group if missing.
Makefile calls it with sudo so it has the rights to install packages.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-04-22 09:27:45 -04:00
roof 368457ecce fix: move dep checks into scripts/check_deps.sh for robustness
Replaces fragile one-liner Makefile chain with a proper shell script.
Tries: sudo -n apt → python3 -m pip --user → get-pip.py bootstrap.
Prints a clear manual-install message if all automated paths fail.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-04-22 09:23:01 -04:00
roof b2f12824ac fix: check-deps uses sudo -n and pip --user, no TTY required
sudo -n skips apt silently if no sudo rights (SSH non-interactive).
Falls back to python3 -m pip install --user which never needs root,
then ensurepip if pip module is missing. Friendly error if all fail.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-04-22 09:21:29 -04:00
roof 1e43f408bc fix: make setup auto-installs deps and handles container-owned dirs
- Add check-deps target: auto-installs python3, pip3, cryptography via
  apt (with pip fallback) before running setup_cell.py
- Add sudo chown in setup to reclaim config/data dirs if containers have
  taken ownership (e.g. re-running setup after make start)
- Pass PUID/PGID=$(id -u/g) to docker-compose so linuxserver/wireguard
  chowns its config dir to the host user instead of hardcoded UID 911

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-04-22 09:19:44 -04:00
roof f908a3b74b fix: make start builds images automatically
docker compose up --build ensures the API and webui images are always built
from the current source on first install or after code changes, so users
don't need a separate make build-api step.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-04-22 08:33:46 -04:00
roof 35e1cf93dd fix: setup accepts WG_PRIVATE_KEY/WG_PUBLIC_KEY env vars
Allows running make setup on hosts without wg binary or Python cryptography
library by passing pre-generated keys from another machine.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-04-22 08:13:53 -04:00
roof f78a99bbd4 fix: Makefile supports docker compose v2 plugin and v1 standalone
DC variable auto-detects available command at build time.
Also fixes backup and dev targets that incorrectly used $(DC).yml.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-04-22 07:45:56 -04:00
roof 4ed2a6cbae fix: config persistence, setup script, and install docs
- app.py: ConfigManager now uses CONFIG_DIR env var for config file path
  instead of hardcoded './config/cell_config.json' — config was being read
  from the image's working directory, making all settings writes ephemeral
  (lost on container restart)
- wireguard_manager: generate_config uses configured address/port instead of
  hardcoded 10.0.0.1 in DNAT rules and Address field
- scripts/setup_cell.py: full setup script — generates WireGuard keys (wg
  binary or Python cryptography fallback), writes wg0.conf and cell_config.json
  with correct _identity key; CELL_NAME / VPN_ADDRESS / WG_PORT env vars
- Makefile: setup target passes env vars through; build-api / build-webui targets
- README: replace install.sh references with make setup && make start

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-04-22 07:37:11 -04:00
Constantin 534206a236 switch python3 2025-09-13 16:10:51 +03:00
Constantin f0b6d1cff1 wip: make work Services Status 2025-09-13 14:23:31 +03:00
Constantin 2277b11563 init 2025-09-12 23:04:52 +03:00