- network_manager: api/webui DNS records now point to Caddy (172.20.0.2)
instead of their container IPs so Caddy can reverse-proxy correctly
- ip_utils: add webui.dev block to generated Caddyfile
- config/caddy/Caddyfile: regenerated with webui.dev block
- config/dns/Corefile: simplify to single forward zone (remove duplicate)
- app.py peer_dashboard: rename peer_name→name, rx_bytes→transfer_rx,
tx_bytes→transfer_tx to match PeerDashboard.jsx; add service_urls dict
- app.py peer_services: fix DNS (10.0.0.1→real CoreDNS IP), CalDAV URL
(radicale.dev:5232→calendar.dev), email structure (flat→nested smtp/imap
objects), rename webdav→files, add WireGuard config text, add username field
- PeerDashboard.jsx: render service icon links from service_urls
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Settings: remove Save buttons; autosave is silent (no toast on success, error only)
- Settings: loadAll() resets dirty flags to prevent stale autosave after discard
- app.py: fix domain/ip_range "actually changed" check — full identity is always
sent on save so these were triggering pending on every keystroke regardless
- app.py: _dedup_changes handles port-change format "service field: old → new"
(split on ':' not ' changed') so dns_port changed twice shows one entry
- app.py: domain + cell_name changes now go through pending restart banner;
apply_domain/apply_cell_name write files immediately (reload=False) and set
pending; Discard restores zone files + Caddyfile to pre-change state
- app.py: _set_pending_restart captures pre-change snapshot BEFORE config writes
(was snapshotting after, making Discard a no-op)
- app.py: is_local_request reads /proc/net/route to allow the actual Docker
bridge subnet (172.0.0.0/24) which is not RFC-1918; fixes Containers page 403
- container_manager: get_container_logs raises instead of swallowing exceptions
so nonexistent container returns 500+error not 200+empty
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Previously the loop broke after processing the first zone file it found.
If dev.zone already existed (created by apply_ip_range), it would be
processed and the loop would stop — leaving any other zone files (e.g.
cell.zone from an earlier domain) in place. get_dns_records() reads all
.zone files so the stale zone appeared doubled in the UI.
Fix: collect all non-local zone files first, write the target, then
delete every file that is not the current domain's zone.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Sprint 1 — Security & correctness:
- Restore all 10 commented-out is_local_request() checks (vault, containers, images, volumes)
- Fix XFF spoofing: only trust the LAST X-Forwarded-For entry (Caddy's append), not all
- Require prefix length in wireguard.address (was accepting bare IPs like 10.0.0.1)
- Validate service_access list in add_peer (valid: calendar/files/mail/webdav)
- Fix dhcp/reservations POST/DELETE: unpack mac/ip/hostname from body (was passing dict as positional arg)
- Fix network/test POST: remove spurious data arg (test_connectivity takes no args)
- Fix remove_peer: clear iptables rules and regenerate DNS ACLs on deletion (was leaving stale rules)
- Fix CoreDNS reload: SIGHUP → SIGUSR1 (SIGHUP kills the process; SIGUSR1 triggers reload plugin)
- Remove local.{domain} block from Corefile template (local.zone doesn't exist, caused log spam)
- Fix routing_manager._remove_nat_rule: targeted -D instead of flushing entire POSTROUTING chain
Sprint 2 — State consistency:
- Atomic config writes in config_manager, ip_utils, firewall_manager, network_manager
(write to .tmp → fsync → os.replace, prevents truncated files on kill)
- backup_config: now also backs up Caddyfile, Corefile, .env, DNS zone files
- restore_config: restores all of the above so config stays consistent after restore
Sprint 3 — Dead code / documentation:
- Remove CellManager instantiation from app startup (was never called, double-instantiated all managers)
- Document routing_manager scope (targets host, not cell-wireguard; methods not called by any active route)
Sprint 4 — Test infrastructure:
- Add tests/conftest.py with shared tmp_dir, tmp_config_dir, tmp_data_dir, flask_client fixtures
- Add tests/test_config_validation.py: 400 paths for ip_range, port, wireguard.address validation
- Add tests/test_ip_utils_caddyfile.py: 14 tests for write_caddyfile (was completely untested)
- Expand test_app_misc.py: 7 new is_local_request tests covering XFF spoofing and cell-network IPs
- Add --cov-fail-under=70 to make test-coverage
- Add pre-commit hook that runs pytest before every commit
414 tests pass (was 372).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Two bugs caused DNS to fail when the domain name changes:
1. generate_corefile() hardcoded 'cell' as the zone name instead of
using the configured domain — on startup it would silently reset any
domain change back to 'cell'
2. apply_domain() regex replaced ALL non-dot zones (including local.cell)
with the new domain → duplicate zone blocks → CoreDNS crash
Fix: add a domain parameter to generate_corefile/apply_all_dns_rules,
add _configured_domain() helper in app.py, and delegate Corefile updates
in apply_domain() to generate_corefile() so the logic is in one place.
Also parameterise SERVICE_HOSTS ACL entries via the domain argument.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When ip_range changes in Settings, the new subnet is now applied to:
- DNS zone records (network_manager.apply_ip_range)
- Caddy virtual IPs (firewall_manager.ensure_caddy_virtual_ips)
- iptables per-service rules (firewall_manager.update_service_ips)
- docker-compose.yml static IPs if writable (ip_utils.update_docker_compose_ips)
New module ip_utils.py derives all container IPs from the subnet using
fixed offsets so the entire stack stays consistent from one setting.
321 tests pass (72 new tests added for ip_utils, apply_ip_range, update_service_ips).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- NetworkManager.bootstrap_dns_records(): creates A records for all
cell services (api, webui, calendar, files, mail, webmail, webdav,
<cell_name>) using their static container IPs — only runs when the
zone file doesn't exist yet (idempotent)
- API startup: _bootstrap_dns() thread reads cell_name/domain from
config_manager and calls bootstrap — runs alongside enforcement thread
- Fix: add_dns_record(data) and remove_dns_record(data) now correctly
unpack dict kwargs instead of passing dict as positional arg
- Fix: remove duplicate cell{} block in config/dns/Corefile
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Site-to-site WireGuard tunnels between PIC cells with automatic DNS forwarding.
Each cell generates an invite JSON (public key, endpoint, VPN subnet, DNS IP,
domain); the remote cell imports it to establish a bidirectional tunnel and
CoreDNS forwarding block so each cell's domain resolves across the mesh.
Backend:
- CellLinkManager: invite generation, add/remove connections, live WireGuard
handshake status; stores links in data/cell_links.json
- WireGuardManager: add_cell_peer() accepts subnet CIDRs (not /32) and an
optional endpoint for site-to-site peers; _read_iface_field() reads port,
address, and network directly from wg0.conf at runtime instead of constants
- NetworkManager: add/remove CoreDNS forwarding blocks per remote cell domain
- app.py: /api/cells/* routes; _next_peer_ip() derives VPN range from
configured address so peer allocation follows any address change
Frontend:
- CellNetwork page: invite panel (JSON + QR), connect form (paste JSON),
connected cells list (green/red status, disconnect button)
- App.jsx: Cell Network nav entry and route
Tests: 25 new tests across test_wireguard_manager, test_network_manager,
test_cell_link_manager (263 total)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Changes:
- ConfigContext.jsx: React context that loads /api/config once; exposes domain,
cell_name, refresh() — wraps entire app in App.jsx
- Email/Calendar/Files pages: replace hardcoded 'mail.cell', 'calendar.cell',
'files.cell', 'webdav.cell' with domain from ConfigContext; hostname updates
immediately after Settings save (refreshConfig() called on save)
- /api/status: cell_name and domain now read from stored _identity in config_manager,
not hardcoded 'personal-internet-cell' / 'cell.local'
- network_manager.apply_cell_name(old, new): updates hostname A-record in primary
zone file and reloads CoreDNS; called from PUT /api/config when cell_name changes
- Old identity captured before save so apply_cell_name gets the correct old value
- Settings EmailForm: smtp/imap ports are read-only with note (docker-compose.yml level)
- Settings FilesForm: port is read-only with note (Caddy proxies on 80 externally)
- Settings CalendarForm: port labeled "Internal port; clients use 80 via Caddy"
Tests added:
- test_apply_cell_name_renames_host_record
- test_apply_cell_name_noop_when_same
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
config_manager restore_config and import_config previously injected zero-filled
entries (port=0, domain='') for every service schema regardless of whether that
service was in the backup/import data. Removed this logic — only restore what's
actually in the backup.
network_manager.apply_domain now:
- updates dnsmasq.conf domain= line (reload cell-dhcp)
- rewrites Corefile zone blocks to the new domain name
- renames and rewrites the primary zone file $ORIGIN + SOA records
- reloads CoreDNS
Tests added first (TDD):
- test_restore_does_not_zero_unconfigured_services
- test_restore_does_not_zero_import
- test_apply_domain_updates_corefile (zone file + Corefile)
- test_apply_domain_updates_dnsmasq
- test_apply_config_writes_dhcp_range / ntp_servers
- test_apply_config_updates_mailserver_env / no_domain_no_restart
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Each service manager now has apply_config() that writes to the actual config:
- network: dhcp_range → dnsmasq.conf (reload cell-dhcp), ntp_servers → chrony.conf
(restart cell-ntp), domain → dnsmasq.conf domain= line
- email: domain → mailserver.env OVERRIDE_HOSTNAME + POSTMASTER_ADDRESS,
restart cell-mail
- wireguard: port/address/private_key → wg0.conf ListenPort/Address/PrivateKey,
restart cell-wireguard
- calendar: port → radicale config hosts=, restart cell-radicale
PUT /api/config now calls apply_config() after persisting JSON, and returns
{restarted: [...], warnings: [...]} so Settings UI can show which containers
were restarted. _restart_container() helper added to BaseServiceManager.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Service manager fixes (connectivity tests):
- email_manager: replace telnet with socket.create_connection for SMTP/IMAP;
replace nslookup with socket.getaddrinfo for DNS; exclude unconfigured domain
from success (email healthy=False now correctly means ports refused, not missing domain)
- calendar_manager: replace localhost:5232 with cell-radicale:5232;
fix database check to test dir writability instead of file existence (files created on demand)
- file_manager: replace localhost:8080 with cell-webdav:80; add top-level success key
- network_manager: replace nslookup with socket.getaddrinfo;
add success key to dhcp_test and ntp_test return values
- routing_manager: exclude iptables_access from success
(iptables runs in cell-wireguard, not API container)
- wireguard_manager: add success key to no-arg test_connectivity result
Health history UI:
- SvcCol reads data?.status?.running || data?.status?.status — handles nested health check shape
Result: network/wireguard/calendar/files/routing/vault all healthy=True.
Email healthy=False is correct — mail server needs ≥1 account before Dovecot starts.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Fix CoreDNS not loading .cell zones (wrong Corefile path, now uses -conf flag)
- Fix WireGuard server address conflict (172.20.0.1/16 overlapped with Docker
network; changed to 10.0.0.1/24 to eliminate duplicate routes)
- Add SERVERMODE=true and sysctls to WireGuard docker-compose for server mode
- Fix DNS zone file parser to handle 4-field records (name IN type value)
- Add get_dns_records() to NetworkManager; mount data/dns into API container
- Fix peer config endpoint: look up IP/key from registry, use real endpoint
- Add bulk peer statuses endpoint keyed by public_key
- Normalize snake_case API fields to camelCase in WireGuard UI
- Add port check endpoint (checks via live handshake, not unreliable TCP probe)
- Add Caddy virtual hosts for ui/calendar/files/mail .cell domains (HTTP only)
- Fix cell config domain default from cell.local to cell
- Fix Routing Network Config tab (was calling hardcoded localhost:3000)
- Fix DNS records display (record.value not record.ip)
- Move service access guide to top of Dashboard with login hints
- Add /api/routing/setup endpoint
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
roof
Constantin